FourDimensionalPointType
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType
Derived from GM_Point and extended to include properties for describing a three dimensional point with a time.
Properties | Definition | Type |
---|---|---|
altitude | The vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL). | ValAltitudeType |
verticalResolution | A distance corresponding to the number of units or digits to which a measured or calculated value is expressed and used. | ValDistanceType |
verticalDatum | The set of reference points or a mathematical model of the Earth's surface (a datum) against which vertical position measurements are made as basis for measuring elevations. | CodeVerticalDatumType |
verticalConfidenceLevel | A statistical measure of the estimated confidence with which the data captured met its required accuracy. A required confidence level of 90% indicates that 90% of the measured point(s) should meet their respective accuracy requirements. |
Integer |
verticalAccuracy | The difference between the recorded elevation of an entity and its true elevation referenced to the same vertical datum expressed as a linear error at 95 percent probability. | ValDistanceType |
time | The time corresponding to the point. |
DateTime |
temporalAccuracy | The difference between the recorded time of an entity and its true time. |
ClockTime |
horizontalResolution | A distance corresponding to the number of units or digits to which a measured or calculated value is expressed and used. | ValDistanceType |
horizontalAccuracy | The difference between the recorded horizontal coordinates of an entity and its true position referenced to the same geodetic datum expressed as a circular error at 95 percent probability. | ValDistanceType |
horizontalConfidenceLevel | A statistical measure of the estimated confidence with which the data captured met its required accuracy. A required confidence level of 90% indicates that 90% of the measured point(s) should meet their respective accuracy requirements. |
Integer |
height | The vertical distance of a level, a point or an object considered as a point, measured from a specified datum. | ValVerticalDistanceType |
geoidUndulation | The distance of the geoid above (positive) or below (negative) the mathematical reference ellipsoid at the location of the point. | ValDistanceType |
elevation | The vertical distance of a point or a level, on or affixed to the surface of the earth, measured from mean sea level. | ValAltitudeType |
altitude
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@altitude
The vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL).
type: ValAltitudeType
verticalResolution
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@verticalResolution
A distance corresponding to the number of units or digits to which a measured or calculated value is expressed and used.
type: ValDistanceType
verticalDatum
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@verticalDatum
The set of reference points or a mathematical model of the Earth's surface (a datum) against which vertical position measurements are made as basis for measuring elevations.
type: CodeVerticalDatumType
verticalConfidenceLevel
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@verticalConfidenceLevel
A statistical measure of the estimated confidence with which the data captured met its required accuracy. A required confidence level of 90% indicates that 90% of the measured point(s) should meet their respective accuracy requirements.
type: Integer
verticalAccuracy
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@verticalAccuracy
The difference between the recorded elevation of an entity and its true elevation referenced to the same vertical datum expressed as a linear error at 95 percent probability.
type: ValDistanceType
time
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@time
The time corresponding to the point.
type: DateTime
Model | Concept |
---|---|
FIXM 4.2.0 |
absoluteTime |
temporalAccuracy
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@temporalAccuracy
The difference between the recorded time of an entity and its true time.
type: ClockTime
horizontalResolution
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@horizontalResolution
A distance corresponding to the number of units or digits to which a measured or calculated value is expressed and used.
type: ValDistanceType
horizontalAccuracy
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@horizontalAccuracy
The difference between the recorded horizontal coordinates of an entity and its true position referenced to the same geodetic datum expressed as a circular error at 95 percent probability.
type: ValDistanceType
horizontalConfidenceLevel
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@horizontalConfidenceLevel
A statistical measure of the estimated confidence with which the data captured met its required accuracy. A required confidence level of 90% indicates that 90% of the measured point(s) should meet their respective accuracy requirements.
type: Integer
height
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@height
The vertical distance of a level, a point or an object considered as a point, measured from a specified datum.
type: ValVerticalDistanceType
geoidUndulation
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@geoidUndulation
The distance of the geoid above (positive) or below (negative) the mathematical reference ellipsoid at the location of the point.
type: ValDistanceType
elevation
urn:aero:airm:1.0.0:LogicalModel:DataTypes:GeometryTypes:FourDimensionalPointType@elevation
The vertical distance of a point or a level, on or affixed to the surface of the earth, measured from mean sea level.
type: ValAltitudeType