OverArrivalPoint
European Supplement
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint
The event of flying over a significant point associated with the aerodrome of arrival.
| Properties | Definition | Type |
|---|---|---|
| cta | The CTA constraint associated with the over arrival point event. | ControlledTimeOver |
| horizonPoint | The point of the arrival management horizon used by the flight. This applies in particular where the horizon is defined by airspace boundaries. | InfrastructurePoint |
| holdingExitPoint | Published holding fix overflown to exit stack and begin approach. | InfrastructurePoint |
| landingThresholdPoint | The LTP is a point over which the glide path passes at a relative height specified by the reference datum height. It is defined by the WGS-84 latitude, longitude and ellipsoid height. The LTP is normally located at the intersection of the runway centreline and threshold. | InfrastructurePoint |
| initialApproachFix | A fix that marks the beginning of the initial segment and the end of the arrival segment, if applicable. In RNAV applications this fix is normally defined by a fly-by waypoint. | InfrastructurePoint |
| finalApproachFix | That fix or point of an instrument approach procedure where the final approach segment commences. | InfrastructurePoint |
| initialMeteringFix | A point on a route at which flights can be pre-sequenced for an arrival-managed airport. | InfrastructurePoint |
| meteringFix | A reference point over which traffic is metered, i.e measured and/or spaced in time. | InfrastructurePoint |
| arrivalManagementHorizon | The arrival management horizon in effect for this flight. This applies in particular when the horizon is defined in terms of time of flight, so that the point in question is defined implicitly. | ArrivalManagementHorizon |
cta
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@cta
The CTA constraint associated with the over arrival point event.
type: ControlledTimeOver
horizonPoint
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@horizonPoint
The point of the arrival management horizon used by the flight. This applies in particular where the horizon is defined by airspace boundaries.
type: InfrastructurePoint
holdingExitPoint
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@holdingExitPoint
Published holding fix overflown to exit stack and begin approach.
type: InfrastructurePoint
landingThresholdPoint
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@landingThresholdPoint
The LTP is a point over which the glide path passes at a relative height specified by the reference datum height. It is defined by the WGS-84 latitude, longitude and ellipsoid height. The LTP is normally located at the intersection of the runway centreline and threshold.
type: InfrastructurePoint
initialApproachFix
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@initialApproachFix
A fix that marks the beginning of the initial segment and the end of the arrival segment, if applicable. In RNAV applications this fix is normally defined by a fly-by waypoint.
type: InfrastructurePoint
finalApproachFix
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@finalApproachFix
That fix or point of an instrument approach procedure where the final approach segment commences.
type: InfrastructurePoint
initialMeteringFix
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@initialMeteringFix
A point on a route at which flights can be pre-sequenced for an arrival-managed airport.
type: InfrastructurePoint
meteringFix
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@meteringFix
A reference point over which traffic is metered, i.e measured and/or spaced in time.
type: InfrastructurePoint
arrivalManagementHorizon
urn:aero:ses:eurocontrol:airm:1.0.0:LogicalModel:Subjects:Flight:FlightEvent:OverArrivalPoint@arrivalManagementHorizon
The arrival management horizon in effect for this flight. This applies in particular when the horizon is defined in terms of time of flight, so that the point in question is defined implicitly.
type: ArrivalManagementHorizon