TrajectoryPointPropertyTypeType

fx:TrajectoryPointPropertyTypeType

Enumerates any applicable properties of the trajectory point.

Properties Definition Type
AIRPORT_REFERENCE_LOCATION Indicates that the associated trajectory point is the airport reference location. enum value
BEGIN_STAY Indicates that the associated trajectory point is a point at which the flight is expected to begin an operation at which the flight will remain for some time. enum value
CONSTRAINT_POINT Indicates that the associated trajectory point is the point of application of a constraint. These can include explicit altitude, speed or time constraints or implicit MIT/MINIT, or sequencing constraints. For named constraints, a reference to the name of the constraint should be provided under trajectory point reference. enum value
CROSSING_CONSTRAINED_AIRSPACE Indicates that the associated trajectory point is the point at which the trajectory is predicted to cross constrained airspace designated as a line. enum value
CROSSOVER_ALTITUDE The point in climb or descent where the airplane will transition between Mach and IAS control. (ARINC 702A) enum value
DEPARTURE_RUNWAY_END Indicates that the associated trajectory point corresponds to the point at the end of the runway on departure. This point is at the center of the runway at the departure end when departing. enum value
END_EXPECT_VECTORS When procedures specify "Expect Vectors", the associated point identifies the ending point of the vectoring. The Point4D data at this point includes an estimate of the impact of vectoring. enum value
END_LANDING_ROLL Indicates that the associated trajectory point corresponds to the point at which the aircraft is predicted to come to a full stop on the arrival runway. (A prediction only, the flight will likely exit the runway without coming to a full stop). enum value
END_PREDICTION_POINT Indicates that the associated trajectory point is the final point at which a prediction was made. For FF-ICE Planning, an eASP may provide a trajectory which is predicted to end at an exit point from the eASP airspace. enum value
END_STAY Indicates that the associated trajectory point is a point at which the flight is expected to terminate an operation at which it remained for some time. enum value
ENTRY_CONSTRAINED_AIRSPACE Indicates that the associated trajectory point is the point at which the trajectory is predicted to cross into designated constrained airspace. enum value
ENTRY_RESTRICTED_OR_RESERVED_AIRSPACE Indicates that the associated trajectory point is the point at which the flight is predicted to enter an airspace restriction/reservation, including any additional safety buffer. An identifier to the airspace is provided in the trajectory point reference. enum value
EXIT_CONSTRAINED_AIRSPACE Indicates that the associated trajectory point is the point at which the trajectory is predicted to exit from designated constrained airspace. enum value
EXIT_RESTRICTED_OR_RESERVED_AIRSPACE Indicates that the associated trajectory point is the point at which the flight is predicted to exit an airspace restriction/reservation, including any additional separation requirements. An identifier to the airspace is provided in the trajectory point reference. enum value
FIR_BOUNDARY_CROSSING_POINT Indicates the point at which the trajectory crosses from one FIR into another. A named reference to the FIR being entered may also be provided. enum value
HOLD_ENTRY Indicates that the associated trajectory point is a point at which the flight is expected to enter into planned holding. enum value
HOLD_EXIT Indicates that the associated trajectory point is a point at which the flight is expected to exit from planned holding enum value
INITIAL_PREDICTION_POINT Indicates that the associated trajectory point is the initial point at which a prediction was made. For FF-ICE Planning, an eASP may provide a trajectory which is predicted to begin at an entry point into the eASP airspace. This includes a point near entry into the Area of Responsibility. enum value
PRESCRIBED_EET_POINT Indicates that the associated trajectory point represents a point that has been prescribed for required Estimated Elapsed Time reporting. This can include a FIR boundary crossing point or a significant point as prescribed on the basis of regional air navigation agreements, or by the appropriate ATS authority. enum value
RUNWAY_THRESHOLD This point is the threshold (which may be displaced) at the center of the runway at the arrival end when arriving. See ICAO Annex 14. enum value
START_EXPECT_VECTORS When procedures specify "Expect Vectors", the associated point identifies the starting point of the vectoring. enum value
START_TAKEOFF_ROLL Indicates that the associated trajectory point corresponds to the point at the start of takeoff roll (used for departures only) enum value
TCP_LATERAL Indicates that the associated trajectory change point (TCP) is one at which the course, track or heading is expected to change. enum value
TCP_SPEED The point where the airplane will begin accelerating or decelerating as a result of a speed constraint or limit, or reaches the target speed (ARINC 702A) enum value
TCP_VERTICAL Indicates that the associated trajectory change point (TCP) is one at which a level segment (intermediate or cruise) will be initiated or terminated. enum value
TOP_OF_CLIMB The point where the trajectory arrives at the cruise flight level after a climb. There will be one top-of-climb for each cruise flight level (step climbs). (From ARINC 702A) enum value
TOP_OF_DESCENT The point where the trajectory begins a descent from the final cruise flight level. enum value
TRANSITION_ALTITUDE_OR_LEVEL Indicates that the associated trajectory point is the point at which the trajectory reaches the transition altitude (in climb) or level (in descent). enum value
WHEELS_OFF Indicates that the associated trajectory point corresponds to the point at which the aircraft is predicted to be wheels off the runway on departure. enum value
WHEELS_ON Indicates that the associated trajectory point corresponds to the point at which the aircraft is predicted to be wheels on the runway for arrival. enum value


Details

TrajectoryPointPropertyTypeType

TrajectoryPointPropertyTypeType

Enumerates any applicable properties of the trajectory point.

AIRPORT_REFERENCE_LOCATION

fx:TrajectoryPointPropertyTypeType:AIRPORT_REFERENCE_LOCATION

Indicates that the associated trajectory point is the airport reference location.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

BEGIN_STAY

fx:TrajectoryPointPropertyTypeType:BEGIN_STAY

Indicates that the associated trajectory point is a point at which the flight is expected to begin an operation at which the flight will remain for some time.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.BEGIN_STAY_POINT The point at which the flight is expected to begin an operation at which the flight will remain for some time.

CONSTRAINT_POINT

fx:TrajectoryPointPropertyTypeType:CONSTRAINT_POINT

Indicates that the associated trajectory point is the point of application of a constraint. These can include explicit altitude, speed or time constraints or implicit MIT/MINIT, or sequencing constraints. For named constraints, a reference to the name of the constraint should be provided under trajectory point reference.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.CONSTRAINT_POINT The point of application of a constraint.

CROSSING_CONSTRAINED_AIRSPACE

fx:TrajectoryPointPropertyTypeType:CROSSING_CONSTRAINED_AIRSPACE

Indicates that the associated trajectory point is the point at which the trajectory is predicted to cross constrained airspace designated as a line.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

CROSSOVER_ALTITUDE

fx:TrajectoryPointPropertyTypeType:CROSSOVER_ALTITUDE

The point in climb or descent where the airplane will transition between Mach and IAS control. (ARINC 702A)

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.CROSSOVER_ALTITUDE_POINT The point in climb or descent where the aircraft will transition between Mach and IAS control.

DEPARTURE_RUNWAY_END

fx:TrajectoryPointPropertyTypeType:DEPARTURE_RUNWAY_END

Indicates that the associated trajectory point corresponds to the point at the end of the runway on departure. This point is at the center of the runway at the departure end when departing.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

END_EXPECT_VECTORS

fx:TrajectoryPointPropertyTypeType:END_EXPECT_VECTORS

When procedures specify "Expect Vectors", the associated point identifies the ending point of the vectoring. The Point4D data at this point includes an estimate of the impact of vectoring.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

END_LANDING_ROLL

fx:TrajectoryPointPropertyTypeType:END_LANDING_ROLL

Indicates that the associated trajectory point corresponds to the point at which the aircraft is predicted to come to a full stop on the arrival runway. (A prediction only, the flight will likely exit the runway without coming to a full stop).

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.END_OF_LANDING_ROLL_POINT The point at which the aircraft is predicted to come to a full stop on the arrival runway.

END_PREDICTION_POINT

fx:TrajectoryPointPropertyTypeType:END_PREDICTION_POINT

Indicates that the associated trajectory point is the final point at which a prediction was made. For FF-ICE Planning, an eASP may provide a trajectory which is predicted to end at an exit point from the eASP airspace.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.END_PREDICTION_POINT The final point at which a prediction was made.

END_STAY

fx:TrajectoryPointPropertyTypeType:END_STAY

Indicates that the associated trajectory point is a point at which the flight is expected to terminate an operation at which it remained for some time.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.END_STAY_POINT The point at which the flight is expected to terminate an operation at which it remained for some time.

ENTRY_CONSTRAINED_AIRSPACE

fx:TrajectoryPointPropertyTypeType:ENTRY_CONSTRAINED_AIRSPACE

Indicates that the associated trajectory point is the point at which the trajectory is predicted to cross into designated constrained airspace.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.CROSSING_INTO_CONSTRAINED_AIRSPACE_POINT The point at which the trajectory is projected to cross into a constrained airspace.

ENTRY_RESTRICTED_OR_RESERVED_AIRSPACE

fx:TrajectoryPointPropertyTypeType:ENTRY_RESTRICTED_OR_RESERVED_AIRSPACE

Indicates that the associated trajectory point is the point at which the flight is predicted to enter an airspace restriction/reservation, including any additional safety buffer. An identifier to the airspace is provided in the trajectory point reference.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

EXIT_CONSTRAINED_AIRSPACE

fx:TrajectoryPointPropertyTypeType:EXIT_CONSTRAINED_AIRSPACE

Indicates that the associated trajectory point is the point at which the trajectory is predicted to exit from designated constrained airspace.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.EXIT_FROM_CONSTRAINED_AIRSPACE_POINT The point at which the trajectory is projected to exit from designated constrained airspace.

EXIT_RESTRICTED_OR_RESERVED_AIRSPACE

fx:TrajectoryPointPropertyTypeType:EXIT_RESTRICTED_OR_RESERVED_AIRSPACE

Indicates that the associated trajectory point is the point at which the flight is predicted to exit an airspace restriction/reservation, including any additional separation requirements. An identifier to the airspace is provided in the trajectory point reference.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

FIR_BOUNDARY_CROSSING_POINT

fx:TrajectoryPointPropertyTypeType:FIR_BOUNDARY_CROSSING_POINT

Indicates the point at which the trajectory crosses from one FIR into another. A named reference to the FIR being entered may also be provided.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.FIR_BOUNDARY_CROSSING_POINT The point at which the trajectory crosses from one FIR into another.

HOLD_ENTRY

fx:TrajectoryPointPropertyTypeType:HOLD_ENTRY

Indicates that the associated trajectory point is a point at which the flight is expected to enter into planned holding.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.HOLD_ENTRY_POINT The point at which the flight is expected to enter into planned holding.

HOLD_EXIT

fx:TrajectoryPointPropertyTypeType:HOLD_EXIT

Indicates that the associated trajectory point is a point at which the flight is expected to exit from planned holding

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.HOLD_EXIT_POINT The point at which the flight is expected to exit from planned holding.

INITIAL_PREDICTION_POINT

fx:TrajectoryPointPropertyTypeType:INITIAL_PREDICTION_POINT

Indicates that the associated trajectory point is the initial point at which a prediction was made. For FF-ICE Planning, an eASP may provide a trajectory which is predicted to begin at an entry point into the eASP airspace. This includes a point near entry into the Area of Responsibility.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.INITIAL_PREDICTION_POINT The initial point at which a prediction was made.

PRESCRIBED_EET_POINT

fx:TrajectoryPointPropertyTypeType:PRESCRIBED_EET_POINT

Indicates that the associated trajectory point represents a point that has been prescribed for required Estimated Elapsed Time reporting. This can include a FIR boundary crossing point or a significant point as prescribed on the basis of regional air navigation agreements, or by the appropriate ATS authority.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

RUNWAY_THRESHOLD

fx:TrajectoryPointPropertyTypeType:RUNWAY_THRESHOLD

This point is the threshold (which may be displaced) at the center of the runway at the arrival end when arriving. See ICAO Annex 14.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

START_EXPECT_VECTORS

fx:TrajectoryPointPropertyTypeType:START_EXPECT_VECTORS

When procedures specify "Expect Vectors", the associated point identifies the starting point of the vectoring.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

START_TAKEOFF_ROLL

fx:TrajectoryPointPropertyTypeType:START_TAKEOFF_ROLL

Indicates that the associated trajectory point corresponds to the point at the start of takeoff roll (used for departures only)

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.START_OF_TAKEOFF_ROLL The trajectory point at the start of take-off roll.

TCP_LATERAL

fx:TrajectoryPointPropertyTypeType:TCP_LATERAL

Indicates that the associated trajectory change point (TCP) is one at which the course, track or heading is expected to change.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

TCP_SPEED

fx:TrajectoryPointPropertyTypeType:TCP_SPEED

The point where the airplane will begin accelerating or decelerating as a result of a speed constraint or limit, or reaches the target speed (ARINC 702A)

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

TCP_VERTICAL

fx:TrajectoryPointPropertyTypeType:TCP_VERTICAL

Indicates that the associated trajectory change point (TCP) is one at which a level segment (intermediate or cruise) will be initiated or terminated.

Semantic Correspondence
AIRM Concept Definition
Change request A change request is required on the AIRM.
Notes

Not found in AIRM

TOP_OF_CLIMB

fx:TrajectoryPointPropertyTypeType:TOP_OF_CLIMB

The point where the trajectory arrives at the cruise flight level after a climb. There will be one top-of-climb for each cruise flight level (step climbs). (From ARINC 702A)

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.TOP_OF_CLIMB The trajectory point at which the trajectory arrives at the cruise flight level. There will be one top-of-climb for each cruise flight level (step climbs).

TOP_OF_DESCENT

fx:TrajectoryPointPropertyTypeType:TOP_OF_DESCENT

The point where the trajectory begins a descent from the final cruise flight level.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.TOP_OF_DESCENT The trajectory point at which the trajectory begins a descent from the cruise flight level.

TRANSITION_ALTITUDE_OR_LEVEL

fx:TrajectoryPointPropertyTypeType:TRANSITION_ALTITUDE_OR_LEVEL

Indicates that the associated trajectory point is the point at which the trajectory reaches the transition altitude (in climb) or level (in descent).

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.TRANSITION_ALTITUDE_OR_LEVEL_POINT The point at which the trajectory reaches the transition altitude (in climb) or level (in descent).

WHEELS_OFF

fx:TrajectoryPointPropertyTypeType:WHEELS_OFF

Indicates that the associated trajectory point corresponds to the point at which the aircraft is predicted to be wheels off the runway on departure.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.WHEELS_OFF_POINT The point at which the aircraft is predicted to be wheels off the runway on departure.

WHEELS_ON

fx:TrajectoryPointPropertyTypeType:WHEELS_ON

Indicates that the associated trajectory point corresponds to the point at which the aircraft is predicted to be wheels on the runway for arrival.

Semantic Correspondence
AIRM Concept Definition
CodeRouteTrajectoryPointUsageType.WHEELS_ON_POINT The point at which the aircraft is predicted to be wheels on the runway for arrival.