RouteTrajectoryElementType
fx:RouteTrajectoryElementType
A portion of the route that can be at one of three levels as described below: a) A Route Element defined by a Significant Point and the ATS Route (or direct route) to be followed until a change in route. b) An Expanded Route Element defined by a Significant Point and the ATS Route (or direct route) to be followed until the next Significant Point, which may be along the same ATS Route. c)A Trajectory Element defined by a geographic point and the ATS Route (or direct route) followed until the next trajectory point. [FF-ICE/1 Implementation Guidance Manual, Appendix B, Chapter B-3.2]
Properties | Definition | Type |
---|---|---|
alongRouteDistance | The distance along the route. For an eASP-provided expanded route, it is computed from the first converted point in the eASP's airspace for each route point in the expanded route. For an operator-provided expanded route, it is computed from the beginning of the route. | fb:DistanceType |
constraint | A number of constraints can be associated with each Expanded Route Point and Trajectory point. | fx:RouteTrajectoryConstraintType |
elementStartPoint | A specified geographical location used in defining the flight route or expanded route. [FIXM] | fb:SignificantPointChoiceType |
enRouteDelay | En Route delay or holding planned to occur at a significant point or along a route element. | fx:EnRouteDelayType |
extension | An extension hook for attaching extension (non-core) classes. | fb:RouteTrajectoryElementExtensionType |
flightRulesChange | Describes the planned change of flight rules (e.g., IFR/VFR) associated with a route point. | fx:FlightRulesType |
modified | Identifies if the route point or element was modified from the reference version, identified in the message, during negotiation by an ASP. | fx:ModifiedRouteItemIndicatorType |
modifiedRouteItemReference | A reference to an ATFM program name that modified the route. | fb:CharacterStringType |
point4D | Identifies the location, altitude and time of a trajectory point. | fx:TrajectoryPoint4DType |
routeChange | Flight Route element may contain a list of route changes. | fx:RouteChangeType |
routeDesignatorToNextElement | The route (airway) to the next element on the route. Can be either an en route airway, standard instrument departure route, or standard instrument arrival route. [FIXM] | fx:RouteDesignatorToNextElementChoiceType |
routeTruncationIndicator | Indicates the route description is truncated at the preceding point. | fx:RouteTruncationIndicatorType |
seqNum | Incrementing identifier used to ensure the sequence of ordered lists is retained. The identifier should begin at zero. [FIXM] | fb:CountType |
Details
RouteTrajectoryElementType
RouteTrajectoryElementType
A portion of the route that can be at one of three levels as described below: a) A Route Element defined by a Significant Point and the ATS Route (or direct route) to be followed until a change in route. b) An Expanded Route Element defined by a Significant Point and the ATS Route (or direct route) to be followed until the next Significant Point, which may be along the same ATS Route. c)A Trajectory Element defined by a geographic point and the ATS Route (or direct route) followed until the next trajectory point. [FF-ICE/1 Implementation Guidance Manual, Appendix B, Chapter B-3.2]
alongRouteDistance
fx:RouteTrajectoryElementType:alongRouteDistance
The distance along the route. For an eASP-provided expanded route, it is computed from the first converted point in the eASP's airspace for each route point in the expanded route. For an operator-provided expanded route, it is computed from the beginning of the route.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
RouteTrajectoryPoint.distanceFromTakeOff | Cumulative track distance from take-off to that trajectory point. |
constraint
fx:RouteTrajectoryElementType:constraint
A number of constraints can be associated with each Expanded Route Point and Trajectory point.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Change request | A change request is required on the AIRM. |
elementStartPoint
fx:RouteTrajectoryElementType:elementStartPoint
A specified geographical location used in defining the flight route or expanded route. [FIXM]
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Change request | A change request is required on the AIRM. |
Notes
Not found in AIRM
enRouteDelay
fx:RouteTrajectoryElementType:enRouteDelay
En Route delay or holding planned to occur at a significant point or along a route element.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
RouteTrajectory.enRouteDelay | A delay planned to occur while enroute. |
extension
fx:RouteTrajectoryElementType:extension
An extension hook for attaching extension (non-core) classes.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Out of scope | This concept is considered as out of the scope of the AIRM. |
flightRulesChange
fx:RouteTrajectoryElementType:flightRulesChange
Describes the planned change of flight rules (e.g., IFR/VFR) associated with a route point.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
RouteTrajectoryPoint.flightRulesChange | A change of flight rules that occurs at the trajectory point. |
modified
fx:RouteTrajectoryElementType:modified
Identifies if the route point or element was modified from the reference version, identified in the message, during negotiation by an ASP.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Out of scope | This concept is considered as out of the scope of the AIRM. |
Rationale
messaging
modifiedRouteItemReference
fx:RouteTrajectoryElementType:modifiedRouteItemReference
A reference to an ATFM program name that modified the route.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Change request | A change request is required on the AIRM. |
point4D
fx:RouteTrajectoryElementType:point4D
Identifies the location, altitude and time of a trajectory point.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Out of scope | This concept is considered as out of the scope of the AIRM. |
Rationale
Container
routeChange
fx:RouteTrajectoryElementType:routeChange
Flight Route element may contain a list of route changes.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Change request | A change request is required on the AIRM. |
Notes
Not found in AIRM
routeDesignatorToNextElement
fx:RouteTrajectoryElementType:routeDesignatorToNextElement
The route (airway) to the next element on the route. Can be either an en route airway, standard instrument departure route, or standard instrument arrival route. [FIXM]
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Change request | A change request is required on the AIRM. |
Notes
Not found in AIRM
routeTruncationIndicator
fx:RouteTrajectoryElementType:routeTruncationIndicator
Indicates the route description is truncated at the preceding point.
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Out of scope | This concept is considered as out of the scope of the AIRM. |
Rationale
messaging
seqNum
fx:RouteTrajectoryElementType:seqNum
Incrementing identifier used to ensure the sequence of ordered lists is retained. The identifier should begin at zero. [FIXM]
Semantic Correspondence
AIRM Concept | Definition |
---|---|
Out of scope | This concept is considered as out of the scope of the AIRM. |